Common Types of CNC Woodworking Tools – Dong Phuong Furniture

In modern woodworking technology, advanced machinery is only a necessary condition; a sharp and suitable CNC machining tool system is the sufficient condition for creating a perfect product. Choosing the right tool not only determines the precision of the patterns and the sharpness of the cuts but also directly affects the machine’s lifespan and production speed. At Dong Phuong Furniture (DPF), with over 50 machines operating continuously, we always apply the most rigorous tool selection and inspection process to ensure that every finished wood piece achieves high consistency and an absolutely smooth and beautiful surface.

1. Main types of CNC woodworking tools at Dong Phuong Furniture

To meet the demands of various profiles, from flat panel cutting to artistic 3D carving, a reputable CNC woodworking workshop like DPF always equips itself with a full range of specialized cutting tools:

1. Straight Bit: Specifically designed for cutting sheets and milling flat grooves on various types of engineered wood panels such as MDF, Plywood, and HDF. This type of bit produces clean, square cuts.

2. Compression Bit: A special type of cutter with two counter-rotating helical threads, which helps to tightly compress the board surface during cutting. This is a core CNC machining tool used to cut melamine or laminate-coated MDF boards without chipping the edges on both the top and bottom surfaces.

3. Ball Nose Bit: With a rounded tip, this is the primary tool used for 3D wood carving , creating curved shapes, rough chair backs, or undulating sofa armrests in a neoclassical style.

4. V-Groove Bit: Specifically used for engraving letters, creating decorative lines, or milling bevels and adding depth to door panels and cabinet doors.

 

2. The importance of knife material to product quality.

Each type of wood has a different cell density and hardness, therefore the material of the milling cutter greatly affects the surface smoothness:

• Carbide cutting tools: DPF prioritizes the use of solid carbide cutting tools with high hardness and good heat resistance when running the machine at high rotational speeds ( $18,000 – $24,000 rpm). This results in sharp cuts without splintering or burning the edges.

• Wear and Tolerance Control: After a period of operation, cutting tools will wear down, altering their actual diameter. The technical team at DPF regularly reviews and measures tool parameters to make adjustments via software, ensuring the lowest possible technical tolerances and high consistency for mass production orders.

 

3. Application of combined cutting tools in the machining of technical wood joints.

High-end furniture manufacturing requires precise joints. We use end mills combined with chamfering tools to perform technical wood mortise and tenon joint machining (depending on the type):

• Milling mortise and tenon joints directly onto the chair legs or furniture frame.

• Precise cutting ensures that the frame joints are perfectly fitted, increasing the load-bearing capacity of the finished product.

 

4. Machining prices vary dynamically based on tool wear (New)

The cost of replacing and maintaining the sharpness of CNC machining tools is a component of the service price. Therefore, DPF’s pricing policy will vary based on:

• Type of wood processed: Group 1 woods or woods with high silica content (such as acacia wood) cause the cutting tools to wear out quickly, requiring a higher frequency of tool changes compared to MDF, leading to a difference in machine operating costs.

• Design complexity: Intensive 3D carving products require multiple processes, from rough cutting to fine finishing with small tools; longer machine running times will result in correspondingly higher pricing.

• Detailed dimensions: Thick wood workpieces require deeper tool passes and more passes, affecting operating time and tool wear.

 

5. Material Management and Preservation Procedures at DPF (New)

In addition to optimizing cutting paths, DPF is always committed to protecting our clients’ assets:

• Clean material storage: Our factory system, spanning over 10,000m2, allows for the scientific storage of customers’ wood blanks, guaranteeing no surface scratches or material loss while awaiting machine assembly.

• Clean cutting path, minimal cold processing: Properly calculated tool stepovers result in a smooth, polished workpiece surface, reducing the customer’s manual sanding time by 70%.

 

6. Production capacity of Dong Phuong Furniture

Dong Phuong Furniture proudly stands as the leading satellite CNC machining center in the Southern region:

A system of over 50 high-power CNC machines.

Owning a large number of machines allows us to easily categorize specialized machines for each type of cutting tool (sheet metal cutting machines, 3D engraving machines, 4-axis lathes), optimizing setup time and accelerating production progress.

Factory/warehouse spanning over 10,000 square meters in Dong Nai

DPF’s large-scale infrastructure enables it to handle major project orders from Dong Nai, Binh Duong, and Ho Chi Minh City, and meet stringent standards for export furniture.

Things to note when placing outsourcing orders with DPF

Customers interested in CNC machining services please note:

• Regarding materials: The company only provides processing services and does not supply raw materials or components . Customers must prepare their own pre-treated wooden blanks.

• Regarding shipping: The company does not offer shipping services . However, for large orders, we have a policy of offering additional discounts to help cover shipping costs .

• Information channels: See more machine operation videos on the Fanpage: Dong Phuong Furniture Production and Trading Co., Ltd. and website: dpfcncmachining.com.

 

---

24/7 Consultation:  0856.186.999 & 0835.886.999

 Dong Phuong Furniture Manufacturing and Trading Company Limited

Address:  Group 2, Vam Hamlet, Trang Dai Ward, Dong Nai Province

Website: DPF CNC MACHINING

YouTube: Dong Phuong Furniture